Pulse dust removal equipmentThe technology of using flow pulse valves to spray cleaning dust one by one through filter bags can be applied to many ultrafine powders and high concentration gases. Under the new national environmental protection regulations, it is not only widely used for dust control in the cement industry, but also widely used in the deep processing of non-metallic mineral fine powder. It has good application prospects in industries such as chemical engineering, metallurgy, steel, and power.
Pulse dust removal equipmentFeatures:
1. The dust removal of this pulse dust collection equipment is partially done by the original agitator, and the equipment automatically reverses the combination of the ash discharge valve and the air blower. Expanded the application role of pulse dust collection equipment in cleaning dust, reduced the repair of pulse dust removal equipment, and strictly sealed and discharged dust.
2. Pulse dust removal equipment has revolutionized the uncovering equipment and the fixing method of filter bags, providingPulse dust removal equipmentMaintenance and protection have improved working conditions.
3. Due to the improvement in the structure of the pulse dust collection equipment, the tightness of the pulse dust collection equipment has been enhanced. Therefore, the air leakage rate of the pulse dust removal equipment can be less than 10%, further improving the product quality of the pulse dust collection equipment.
4. The spraying equipment of this pulse dust removal equipment has added a protective cover, and the cover plate structure of the pulse dust removal equipment adopts rainproof measures, which allows the pulse dust removal equipment to be placed outdoors without the need for additional rainproof sheds, reducing construction investment.
The working principle of pulse dust removal equipment:
When this pulse dust removal equipment is operating, the dusty gas enters the box through the inlet of the single pulse dust removal equipment, and the purified gas filtered by the filter bag of the pulse dust removal equipment is sucked in and directly discharged by the fan. The dust collected by the pulse dust removal equipment falls into the ash hopper and is discharged through the ash discharge valve. With the addition of filtering time, the dust accumulated on the filter bag of the pulse dust removal equipment continues to increase, adding resistance to the filter bag, causing the processing air volume to gradually decrease. In order to ensure the normal operation of the pulse dust removal equipment, the dust accumulated on the surface of the filter bag falls off, and the filter bag is regenerated. Thus, the accumulation is attached toPulse dust removal equipment filter bagThe dust on the pulse is periodically sprayed to clean the dust, allowing the purified gas to pass through normally and ensuring the operation of the pulse dust removal equipment system.